Omron BP791IT Instruction Manual page 24

4 ..Press.the.SET.button.to.confirm.the.change .
If.on.is.selected,.the.number.of.seconds.between.each.measurement.is.
displayed .
NOTE:.. T he.default.value.between.each.measurement.is.60.seconds .
5 ... P ress.the.Up.or.Down.button.(
time.between.each.measurement .
The.interval.can.be.set.to.15.seconds,.30.seconds,.60.seconds.or.120.
seconds ..Continue.to.press.the.Up.or.Down.button.until.the.desired.
interval.appears.on.the.display .
6 ... P ress.the.SET.button.to.confirm.the.setting .
The.year.flashes.on.the.display .
SETTING TRUREAd
/ ).to.change.the.interval.of.
24
TM