Get Into Fw Mode; Check Fw Version - Optoma EW610ST Service Manual

5-1-2 Get into FW mode

1. Get into Firmware mode
- Plug power cord into projector.
- �old �menu� button. �old �menu� button.
- Connect the projector with PC by USB
cable.
Note: - "Menu" button must be held until "Temp"
and "Lamp" LED light on (as red circle).

5-1-3 Check FW version

1.Restart the unit and get into the Service
Mode(Press Power --> Left --> Left --> Menu).
2.The firmware version will be shown as red circle
on the screen.
EW610ST/EX610ST/EW605ST/EX605ST
Confidential
5-2