Table of Contents
Advertisement
Delta Elec. Inc.
Step 8: When the last warning message box appears, this is the last chance to stop the
update.
Press "OK" button to start the firmware update.
Caution:
DO NOT install any USB driver when erasing or upgrading process started.
Step 9: According to the Flash-ROM technology, Flash-Tool needs to erase the old splash logo
before adding the new one.
Step 10: After old logo erased, the new logo upgrading process will start.
Company Confidential
60
EX779
Optoma__________________
Erasing old logo
Changing new logo
Delta________________
2010/04/14
Advertisement
Table of Contents
