Table of Contents
Advertisement
Delta Elec. Inc.
Step 3: The System will be not under 1W condition before you programming flash updated.
Projector is in STAND BY mode.
Make sure the USB cable is firmly attached between projector and computer.
Press holds the
<Left>
The LAMP LED (Red) will blink one time and please make sure the system is not under 1W stay.
Press <Down>, <Up>, <Right>, <Up> keys in sequence using keypad buttons, or using the IR
remote controller for those with limited keypads.
The lamp LED (Red) will blink one time and the Flash-Tool mode will be enabled.
Note:
The Windows hardware wizard will pop up if the USB device driver is not installed.
Simply select the recommended options, and let Windows Wizard does the trick.
Step 4: Press "Choose" button to locate the new firmware which can be downloaded from
website (For example: DP-3622 JAXX-DPD0A.img). Select the desired *.img file by either
double clicking the file or pressing the "Open" button to load the file.
Company Confidential
52
keys and connects the power cord to the projector at same time,
Optoma__________________
EX779
Use .img file type for firmware binary data
Delta________________
2010/04/14
Advertisement
Table of Contents
