Table of Contents
Advertisement
Delta Elec. Inc.
Step 3:
The System will be not under 1W condition before you programming flash updated.
Projector is in STAND BY mode.
Make sure the USB cable is firmly attached between projector and computer.
Press holds the
<Left>
The LAMP LED (Red) will blink one time and please make sure the system is not under 1W stay.
Press <Down>, <Up>, <Right>, <Up> keys in sequence using keypad buttons, or using the IR
remote controller for those with limited keypads.
The lamp LED (Red) will blink one time and the Flash-Tool mode will be enabled.
Note:
The Windows hardware wizard will pop up if the USB device driver is not installed.
Simply select the recommended options, and let Windows Wizard does the trick.
Step 4: Press the "Choose" button to locate the new splash logo.
Select the image type in either BMP or JPG in the "File of type" option.
Company Confidential
58
keys and connects the power cord to the projector at same time,
Optoma__________________
EX779
BMP/JPG selection
Delta________________
2010/04/14
Advertisement
Table of Contents
