Setup Procedure; Ddc Key-In Procedure (Vga1,Vga2,Dvi Interface) - Optoma EP776 Service Manual

6-3 Setup Procedure (VGA
Port)
Connect all ports
1.
- Power adapter to fixture JP2
- Fixture P1 to PC COM Port
- Fixture P4 to Projector VGA1 in
- Fixture P2 to Projector VGA2 in
- Fixture P3 to Projector DVI
- Power on fixture
- Plug in power cord to unit
Note: Confirm JP3 is "Close" status.
6-4 DDC Key-In Procedure
(VGA1,VGA2,DVI
Interface)
1. Click on "EDID" to execute EDID program
2. Choose model
- In the port selection bar, please choose
the port that you use. Example: if you
use "COM2," choose COM2 in the port
selection.
- Click "Model."
- Choose the EDID that responses to the
model that you choose.
VGA-VGA Cable
2
EP776 Series/EP782 Series Confidential
P
RS232 Cable
P2
P4
DVI-DVI Cable
Adapter
JP2
P3
6-3