Noxon dRadio 100 Manual page 18

dRadio 100
the station later, just press the same memory button for a short time. By the way, you
can of course save different stations in DAB and in FM mode (so you have five memory
buttons available for DAB and FM each).
Change volume
In order to change the volume of your dRadio 100, turn the navigation wheel (1) to the
left for a lower volume or to the right in order to make it louder. If you want to completely
mute your radio temporarily, press the mute button (13) on the control panel.
Display additional information
Press the info button (12) in order to display additional info broadcasted by the currently
tuned station. Please note the type of information broadcasted can alter from one station
to the next.
Setup
Start by pressing the back button (2) in order to navigate to the main menu of your dRa-
dio 100. There you will find the following sub menus:
The DAB menu
Station List
Shows the station list. If a question mark appears in front of the name of a station, it can-
not be received at the moment.
Full Scan
Executes an automatic scan though the complete frequency range and writes the avail-
able stations into the station list.
Manual Tune
Use this if you want to navigate to a certain frequency manually.
The FM menu
At the moment, the FM menu does not contain any further sub menus or functions.
Therefore it redirects to the FM reception mode.
The System Setup menu
Language
Here you can choose from several languages for the menu navigation.
Time Setup
This menu lets you choose from different formats for displaying time and date. You can
18