Sony VAIO Fit 14E User Manual page 367

User Guide
How to Use
Personal Computer
VAIO Fit 14E/15E
SVF1432/SVF1442/SVF1532/SVF1542
Changing the Rapid Wake (Sleep Mode) Settings
You can change the Rapid Wake settings in VAIO Control Center.
Rapid Wake is enabled by default. With this function, your VAIO enters Sleep mode after your working data is saved on
the built-in storage device.
1. Start VAIO Control Center and select Hardware. (See
2. Enable/disable the setting in Rapid Wake.
Note
With Rapid Wake disabled:
Your working data is not saved on the built-in storage device when your VAIO computer enters Sleep mode. Therefore, if
the computer is turned off during Sleep mode because, for example, the battery pack runs out of power or the computer is
disconnected from an AC power source, the working data will be lost. To avoid data loss, be sure to save the data before
the computer enters Sleep mode.
If your VAIO computer is equipped with the power indicator, it blinks slowly in orange during Sleep mode. When the
battery pack runs out of power during Sleep mode, the charge indicator light blinks. If the computer is equipped with the
power indicator, it blinks along with the charge indicator.
Related Topic
Using Sleep Mode
Notes on Sleep Mode
Starting Apps
Notes on use
Copyright 2013 Sony Corporation
367
to start VAIO Control Center.)