Sony VAIO Fit 14E User Manual page 348

User Guide
How to Use
Personal Computer
VAIO Fit 14E/15E
SVF1432/SVF1442/SVF1532/SVF1542
Removing Recovery Content to Free up Disk Space
Your built-in storage device contains the recovery area where the data for system recovery is stored. If your VAIO
computer includes a solid state drive (SSD), you might want to minimize the recovery area by removing such data to free
up disk space on the C: drive (or the last drive in your drive list, for example D: drive).
You need Recovery Media to remove the data for system recovery or to recover the computer after you remove the
data.
Note that removing recovery content makes it impossible to use the refresh function.
1. Create Recovery Media if you have not yet created it.
See Creating Recovery Media
2. Insert the Recovery Media into the optical disc drive or connect a USB flash drive (not supplied) to the USB port on
your VAIO computer while the computer is in Normal mode.
3. Turn off your VAIO computer.
4. Press the ASSIST button to display the VAIO Care (Rescue Mode) screen and select Start from media
(USB device/optical disc).
Follow the on-screen instructions until the VAIO Care (Rescue Mode): VAIO recovery solutions screen
appears.
5. Select Tools and Remove recovery partition.
6. Follow the on-screen instructions.
Related Topic
Creating Other Drives (Modifying Partitions)
Creating Partitions
for more information on how to create Recovery Media.
Notes on use
Copyright 2013 Sony Corporation
348