Part 5
PROGRAMMING MODE -
9 9
Value of coin 1
Entering set up mode.
You will see LqC1
Press the WHITES AND COLORS button.
Press the PERMANENT PRESS or the DELICATES
button until
appears in the display.
Press the START button.
Press the PERMANENT PRESS or the DELICATES
button until
appears in the display.
Press the START button.
Display previous coin 1 value.
Press PERMANENT PRESS(+) or DELICATES(-) button to
select value of coin 1 (The value can be set fronm 0 to 9.95 in
5¢ increments.)
Press the START button.
The machine sets up the value of coin 1, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button
Display
2 7