LG GD1329CGS Owner's Manual page 29

Part 5 PROGRAMMING MODE -
1 1 1 1
Penny increment pricing offset
This represents the cent increment price offset used when debit card is setup.
Entering set up mode.
You will see LqC1
Note
• Penny increment pricing offset is available only in card type.
(It hasn't affected on the coin type's price setting.)
Press the WHITES AND COLORS button.
Press the PERMANENT PRESS or the DELICATES
button until appears in the display.
Press the START button.
Press the PERMANENT PRESS or the DELICATES
button until appears in the display.
Press the START button.
Display previous penny increment pricing offset.
Press PERMANENT PRESS(+) or DELICATES(-) button to
select value of PIPo. (0~4)
Press the START button.
The machine sets up the PIPo, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button Display
2 9