Table of Contents
Advertisement
S e t t i n g s
If data transfer is not started
within 2 minutes after the
activation of the IR port, the
connection is cancelled and must
be started again.
IR connection indicator
When
is shown continuously,
the IR connection is activated, and
your phone is ready to send or
receive data through its IR port.
When
blinks, your phone is
trying to connect to the other
device, or a connection has been
lost.
Packet data (GPRS)
General packet radio service
(GPRS) is a network service that
allows mobile phones to send and
receive data over an Internet
protocol (IP) based network.
To define how to use the service,
select
Menu
>
Settings
Connectivity
>
Packet data
Packet data conn.
following options:
When needed
— to set the packet
data connection to established
when an application needs it. The
connection will be closed when
the application is terminated.
Always online
— to set the phone
to automatically connect to a
54
Copyright © 2006 Nokia. All rights reserved.
>
>
and from the
packet data network when you
switch the phone on.
Modem settings
You can connect the phone using
Bluetooth wireless technology or
USB data cable connection to a
compatible PC and use the phone
as a modem to enable GPRS
connectivity from the PC.
To define the settings for
connections from your PC, select
Menu
>
Settings
>
Packet data
>
Packet data
settings
>
Active access
and activate the access point you
want to use. Select
access pt.
>
Packet data acc.
enter a name to change the access
point settings, and select OK.
Select
Packet data acc.
the access point name (APN) to
establish a connection to an
network, and select OK.
You can also set the EGPRS dial-up
service settings (access point
name) on your PC using the Nokia
Modem Options software. See
"Nokia PC Suite"
p. 89. If you have
set the settings both on your PC
and on your phone, the PC settings
are used.
>
Connectivity
point,
Edit active
pt.,
pt., enter
Advertisement
Table of Contents
