Lenovo IdeaPad S210 Touch Hardware Maintenance Manual page 58

Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance
Manual
Figure 9. Speakers, base cover, audio board, DC-IN board and power board (continued)
When installing: When attaching the audio board to the base cover, adjust the
placement of the USB and headphone jacks as shown , and make sure that both
of the USB and the headphone jacks are attached to the holes on the base cover
as shown. Improper placement of the jacks might cause a damage.
Remove screw
Remove screws
54
a to lift the power board in the direction shown by arrow
Step Screw (quantity)
a M2 × 3 mm, flat-head, nylok-coated (1)
a
to lift the touchpad bracket.
a
Step Screw (quantity)
a M2 × 2.5 mm, flat-head, nylok-
coated (2)
a
b
Color
Black
b .
a
b
Color Torque
Black 1.35 kgfcm
Torque P/N
1.35 kgfcm 90202951