Philips 49PFL4909 User Manual page 20

9
Use J K to select your preferred energy efficiency level, then press
OK.
Select the energy efficiency level you prefer.
Personal
10
Use J K to select your preferred sound setting, then press OK.
Select your preferred sound setting
Sound A Sound B
11
Press OK to finish Settings assistant.
Store your preferences.
Cancel
Network updates will appear after Connection test succeeds.
●
Use J K to select Yes, then press OK.
When the initial setup is completed, the lowest memorized
●
channel with the confirmation message will be displayed on the TV
screen.
Note(s)
If you are not receiving a signal from your Cable service, contact the Cable provider.
●
If you press B during autoprogram, this setup of TV channels will be cancelled.
●
The Initial Autoprogram function can be executed for either Antenna or Cable only once.
●
When you change the connection (Antenna / Cable), select Autoprogram again. L
p. 36
After an Initial Setup is completed...
If you want to scan the channels Automatically again.
●
Autoprogram L p. 36
You can add the desired channels not memorized by Autoprogram
●
through antenna connection.
Weak channel installation L p. 36
If you want to change to another Language.
●
Language L p. 35
If you want to change the country setting.
●
Country L p. 49
If you want to change the Location setting.
●
Location L p. 37
If you want to change the network setting.
●
Network L p. 39
If you want to restore the picture and sound setting.
●
Settings assistant L p. 29
Energy saving
Sound C
Store
20 .
English