Cisco SOHO Series Quick Reference Manual page 82

Interface Cards for Cisco 1700, 2600XM, 3600, and 3700 Series
T1, E1, and G.703 Multiflex Trunk Voice and WAN Interface Cards Benefits & Advantages
Product
VWIC-1MFT-E1
1-port RJ-48 multiflex
trunk-E1 voice/WIC
VWIC-2MFT-E1
2-port RJ-48 multiflex
trunk-E1 voice/WIC
82
continued
Description
This module supports
voice, data, and integrated
voice/data applications.
For data applications, the
VWIC provides a single-
port WIC for E1/FE1 with
an integrated DSU. For a
packet voice solution, the
VWIC provides a single-
port voice interface card
(VIC) with integrated DSU,
that combines with the
digital T1/E1 packet voice
trunk modules.
Modular Router Solutions
Serial and Legacy
Concentration
Voice and Fax Integration
This module supports
voice, data, and integrated
voice/data applications.
For data applications, the
VWIC provides a two-port
WIC for E1/FE1 with an
integrated DSU. For a
packet voice solution, the
VWIC provides a two-port
voice interface card (VIC)
with integrated DSU, that
combines with the digital
T1/E1 packet voice trunk
modules.
Modular Router Solutions
Serial and Legacy
Concentration
Voice and Fax Integration
Supported Platforms
and Minimum Cisco
IOS Versions
3700 Series - 12.2(8)T
3660 Series – 12.0(5)XK
3640 – 12.0(5)XK
3620 – 12.0(5)XK
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12) mainline
(future), 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.0(5)XK
2610 Series – 12.0(5)XK
1760 – 12.2(4)YB
(Sixth release of 12.2T)
1751 – 12.2(4)YB
(Sixth release of 12.2T)
1721 – Future
3700 Series - 12.2(8)T
3660 Series – 12.0(5)XK
3640 – 12.0(5)XK
3620 – 12.0(5)XK
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12) mainline
(future), 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.0(5)XK
2610 Series – 12.0(5)XK
1760 – 12.2(4)YB
(Sixth release of 12.2T)
1751 – 12.2(4)YB
(Sixth release of 12.2T)
1721 – Future
Comments
When used in a Cisco 3600
Series router, requires one
of the following network
modules: NM-2W, NM-
1FE2W, NM-2FE2W,
NM-1FE1R2W, NM-1A-
OC3MM-1V,
NM-1A-OC3SMI-1V, NM-
1A-OC3SML-1V or
NM-HDV.
Minimum Cisco IOS
version may vary
depending on application.
When used in a Cisco 3600
Series router, requires one
of the following network
modules: NM-2W, NM-
1FE2W, NM-2FE2W,
NM-1FE1R2W, NM-1A-
OC3MM-1V,
NM-1A-OC3SMI-1V, NM-
1A-OC3SML-1V or
NM-HDV.
Minimum Cisco IOS
version may vary
depending on application.