Cisco SOHO Series Quick Reference Manual page 86

Interface Cards for Cisco 1700, 2600XM, 3600, and 3700 Series
Analog Voice Interface Cards Benefits & Advantages
Product
VIC-2FXO-M2
2-port FXO voice interface
card with battery reversal
and caller ID support for
Europe
VIC-2FXO-M3
2-port FXO voice interface
card for Australia
VIC-2DID
2-port direct inward dial
voice/fax interface card
86
continued
Description
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections in
Europe only. This voice
interface card supports all
features of VIC-2FXO and
in addition battery
reversal, power denial and
caller ID.
Modular Router Solutions
Voice and Fax Integration
The two-port FXO voice/fax
interface card for Cisco
voice/fax network modules
is used to connect to PBX
or key system, and to
provide off-premise
connections for Australia
only. This voice interface
card works with existing
phone and fax equipment
to provide voice and fax
services over IP , and is
compatible with H.323
standard for audio- and
videoconferencing.
Modular Router Solutions
Voice and Fax Integration
Modular Router Solutions
Voice and Fax Integration
Supported Platforms
and Minimum Cisco
IOS Versions
3700 Series – 12.2(8)T
3660 Series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.1(2)XH
2610 Series – 12.1(2)XH
1760 – 12.2(2)XK
[12.2(11)T–CQ3'02]
1751 – 12.2(2)XJ
(Fifth release of 12.2T)
1721 – Not Available
3700 Series – 12.2(8)T
3660 Series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.1(2)XH
2610 Series – 12.1(2)XH
1760 – 12.2(2)XK
[12.2(11)T–CQ3'02]
1751 – 12.2(4)T
1721 – Not Available
33700 Series – 12.2(8)T
3660 Series – 12.1(5)XM1
3640 – 12.1(5)XM1
3620 – 12.1(5)XM1
2691 – 12.2(8)T1
2600XM Series – 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(5)XM1
2620 Series – 12.1(5)XM1
2610 Series –12.1(5)XM1
1760 – 12.2(2)XK
[12.2(11)T–CQ3'02]
1751 – 12.2(2)XJ
(Fifth release of 12.2T)
1721 – Not Available
Comments
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
"Plus" feature set.
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
"Plus" feature set.
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
"Plus" feature set.