Advertisement
finished, the system will automatically reboot.
8). You have finished the firmware upgrading, keeping to enjoy it !
6.
FAQ
Q:Movie always clip when playing by USB DVD-ROM,why?
A:
1). Bitrate of the source is too large for USB DVD-ROM,suggest to copy the files into
hdd,then try again.
2). There are some mistake on the file due to the DVD disk is destroyed,suggest not to
use the bad DVD disk.
3). USB2.0 chipset of DVD-ROM isn't accord with USB2.0 standard.suggest to change
the DVD-ROM.
4). Others.
Q: Can't find USB device?
A:
1).USB device didn't connect well,pls check;
2).USB2.0 cable has problem,pls use the cable attached in package.
3).Others.
Q: After reboot,I Can't find HDD?
A:
1).HDD isn't format,pls format your hdd first.
2).HDD is destroyed,pls change HDD.
3).Others.
Q: Why there is no audio output?
A:
1). Pls check all the device connected method is right or not?
2).If the file is DTS format,pls connect with your AVR,unit can't support DTS decode
at present.
Q: Why there is no signal output on the monitor?
A:
1).Check your device connect method;
2).Press TV MODE button repeatedly to seek the matched mode,TV MODE should
match with your HDTV.don't press too quickly to get the right mode.
3).After get the right mode,pls enter set up menu,adjust video output mode and
save.then next time,you won't meet this problem again.
7. EVO-I Description and Parameters
Hardware
★ CPU:SIGMA DESIGNS SMP8635
★ Mips 300MHz ,Secure CPU For DRM and CA software:200MHz
★ DDR-1 DRAM support:64-bit 512MB
★ External NOR Flash Support:16-bit 256MB
32
Advertisement
