Related Manuals for Clarke PUMP HIPPO 2
Summary of Contents for Clarke PUMP HIPPO 2
- Page 1 SUBMERSIBLE PUMP SUBMERSIBLE PUMP Model No: HIPPO 2 OPERATING & MAINTENANCE INSTRUCTIONS 0107...
- Page 2 HIPPO 2 240 Volt and 110 Volt models Thank you for purchasing this Clarke Hippo 2 Pump. Before attempting to operate this pump please read this instruction manual thoroughly and follow all directions carefully. This is for your own safety and that of others around you, and to help you achieve long and trouble free service from your pump.
- Page 3 Electrical Connections HIPPO 2 - 240 Volt models: Connect the mains lead to a standard 240 Volt (50Hz) electrical supply through an approved plug or a suitably fused isolator switch. HIPPO 2 - 110 Volt models: Connect the mains lead to a suitable 110 Volt (50Hz) electrical supply through an approved plug or a suitably fused isolator switch, or to a suitable portable 110 volt transformer.
- Page 4 Remove the pump from the water and store it in a frost free location. If the Hippo 2 is to be used where there may be silt or mud (for example, garden ponds), keep the pump clear of any sediment by standing it on a platform or brick.
- Page 5 3/4" adaptor ............... 7200947 1" adaptor ................7200948 PARTS & SERVICE CONTACTS For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 e-mail as follows: PARTS: Parts@clarkeinternational.com SERVICE: Service@clarkeinternational.com...
Need help?
Do you have a question about the PUMP HIPPO 2 and is the answer not in the manual?
Questions and answers