Related Manuals for Clarke CCD96
Summary of Contents for Clarke CCD96
- Page 1 0606 CORDLESS DRILL/SCREWDRIVER CORDLESS DRILL/SCREWDRIVER Model Nos. CCD96 • CCD120 • CCD140 • CCD180 • CCD240 OPERATING & MAINTENANCE INSTRUCTIONS...
- Page 2 PARTS & SERVICE CONTACTS PARTS & SERVICE CONTACTS For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS &...
- Page 3 Thank you for purchasing this CLARKE Cordless Drill set designed for DIY use ONLY. Please read this booklet thoroughly. Your Clarke Cordless drill will give good service if it is used carefully and in accordance with the following advice and recommendations.
-
Page 4: General Safety Precautions
GENERAL SAFETY PRECAUTIONS Keep your Clarke Cordless drill and all other power tools out of reach of children. Keep all equipment dry especially the battery and battery charger. When drilling into walls, ceilings and floors, check first for concealed main services, Water, Electric and Gas. -
Page 5: Removing The Chuck
GET TO KNOW YOUR CORDLESS DRILL Chuck No key is required for operation. To secure a bit, hold the rear portion of the chuck (b) securely with one hand and turn the front portion (a) anticlockwise (from the front) . To remove the bit, repeat the foregoing but turn the chuck clockwise. Removing the Chuck Open the jaws to their fullest extent to allow a cross head screwdriver... - Page 6 BATTERY CHARGING AND CARE Your Clarke Cordless drill is supplied with a 3 hour battery charger. To detach the battery from the drill, press the two lugs, either side of the battery simultaneously whist gently pulling downwards.
- Page 7 Dispose of old batteries with consideration for the environment. They may be returned by post to the Clarke Parts and Service Centre ( see page 3) where you can be assured they will be disposed of safely. Alternatively, seek advice from your local waste disposal authority.
Need help?
Do you have a question about the CCD96 and is the answer not in the manual?
Questions and answers