Vg-100 Installation - Uniden VG-100 Owner's Manual

VG-100 Installation

DO NOT CONNECT THE VG-100 TO YOUR COMPUTER UNTIL INSTRUCTED
TO DO SO BY THE VG-100 INSTALLATION WIZARD
The following instructions will guide you to through the process of installing the
VG-100.
The installation procedure is to:
• Install Skype™
• Start the VG-100 SW installation (step 1 below)
• Plug in the VG-100 WHEN INSTRUCTED TO DO SO
• Verify the installation is OK
• Connect a telephone handset to the VG-100
• Connect the VG-100 to the wall jack. Note that this is optional and only required for
the forwarding features.
• Use your VG-100 to make and receive Skype™ calls
The detailed instructions follow:
If Skype™ is not already installed on your computer, visit
the instructions there to install Skype™. Verify that Skype™ is working before installing the
VG-100.
We strongly recommend you to update the latest Skype due to the one could provide
better performance and resolve some problems than the older one.
http://www.skype.com and follow
7