Dedicated Signal Stalker Ii; Dedicated Tune Search - Radio Shack 20-106 User Manual

Dedicated Searches

Dedicated Signal Stalker II

Dedicated STLK mode lets you access and run
Signal Stalker II easily and quickly.
In Manual, Program or Scan mode, press FUNC
SCAN to access the Signal Stalker II dedicated
mode.
Note: When a signal is being received, the
softkey (F1) changes to
the softkey by pressing FUNC F1 when the
Band
F1 key function is FrL/O.
Operation of the dedicated Signal Stalker II
mode is almost identical to that of the object
mode, with one exception. When dedicated
Signal Stalker II mode is used, you may press
the numeric key on the keypad that corresponds
with the sub-band you wish to enable or disable.
Disabling a sub-band will cause the Signal Stalker
II system to skip the frequencies within that sub-
band as it performs its sweeps.
Signal Stalker II sub-bands:
Freq. (MHz)
0 25-54 MHz
1 108-137
2 137-174 MHz
3 216-300
4 300-406
5 406-470
6 470-512
7 764-806
8 806-869
9 896-1300 MHz
Band
. You can access
FrL/O
Band
VHF Low Band
VHF Aircraft Band
VHF High Band
220 MHz Commercial/
Amateur Band
UHF Military Air Band
UHF Band
UHF-T Band
700 MHz Band
800 MHz Band
900 MHz Band, 23 cm
Amateur Band
64
Public Safety sub bands:
Freq. (MHz)
0 33.4-46.5
1 151-170
2 453-467
3 764-806
4 851-869

Dedicated TUNE Search

Your scanner's dedicated TUNE mode provides
you with the ability to quickly enter any frequency
and monitor that frequency for transmissions, or
search up or down from that frequency for activity.
1. To enter TUNE mode, press TUNE. The
scanner displays the TUNE screen.
By default, TUNE mode is paused when first
activated.
Dedicated Searches
Band
VHF Low Band
VHF High Band
UHF Band
700 MHz Band
800 MHz Band
65