Using The Key Lock; Resetting/Initializing The Scanner - Radio Shack PRO-89 Owner's Manual

USING THE KEY LOCK

Once you program your scanner, you can protect it from acci-
dental program changes by turning on the keylock feature.
When the keypad is locked, the only controls that operate are
, , , , , and .
SCAN MAN LIGHT PGM VOLUME SQUELCH
Note: The keylock does not prevent the scanner from scanning
channels or monitoring a single channel, whichever feature
you last selected.
To turn on the keylock, hold down until the scanner
beeps three times and appears. To turn it off, hold down
until the scanner beeps three times and disap-
pears.

RESETTING/INITIALIZING THE SCANNER

If the scanner's display locks up or does not work properly after
you connect a power source, you might need to reset or initial-
ize the scanner.
Important: If you have problems, first try to reset the scanner
(see "Resetting the Scanner" on Page 48). If that does not
work, you can initialize the scanner (see "Initializing the Scan-
ner" on Page 48); however, this clears all information stored in
your scanner's memory.
47