Features - Rubbermaid Thermo-Electric Travel Cooler and Warmer Owner's Manual & Warranty Information

in the warmer be pre-heated. This will assist the warmer in reaching the
maximum temperature as quickly as possible.
• The warmer will continue to operate as long as the vehicle battery
provides power.
• If the vehicle engine is turned off, the unit will continue to draw power
(a minimal 5-amps or 60-watts) from the vehicle battery.
• If the engine is switched off for a long period (overnight) it is
recommended that the warmer be disconnected from the accessory
outlet to avoid draining the vehicle's battery.
WARNINGS
• Food will stay warm for some time after the unit is disconnected or
turned off.
• Observe common sense hygiene rules, as with any warming unit. Do not
eat or drink perishable items that may have spoiled or become
contaminated.
CONNECTING TO A PORTABLE 12 VOLT DC POWER
SUPPLY, FOR USE AWAY FROM VEHICLE
• Make sure that the unit's HOT/OFF/COLD switch is in the OFF position.
• Insert the 12 volt DC plug on the power cord into the AC/DC power adapter
socket.
• Continue with steps 3-11 for cooler or warmer function. Observe all
CAUTIONS AND WARNINGS.
Note:
The unit will operate for approximately 2.5 hours from a fully charged 12 volt
DC portable power supply.
VEC004ARB
(Sold Separately)
CONNECTING TO AN AC/DC CONVERTER
• Plug converter's (VEC004ARB-120V) power cord into standard 120 volt 60 HZ
outlet
• Make sure that unit's HOT/OFF/COLD switch is in the off position
• Insert the 12 volt DC plug on the power cord into the AC/DC power adapter
socket.
• Continue with steps 3-11 for cooler or warmer function
OBSERVE ALL CAUTIONS AND WARNINGS.
(SOLD SEPARATELY)
6

FEATURES:

• Compact, lightweight, completely portable – use with vehicle or boat's
12 volt DC accessory outlet, or appropriate 12 volt DC power supply
• Non-wearing thermoelectric system cools to approx. 40ºF below surrounding air
temperature or warms to approx. 120ºF
• Built-in holder for two cups or two cans
• Use with standard household containers or ready-to use packaging
• Rests on vehicle seat or floor for easy access
• Padded lid
• Extra-long, 7-foot, 12 volt DC power cord with built-in 5-amp fuse protected plug
to protect the unit and power source
• Convenient, detachable shoulder strap for easy portability
• Durable, weather resistant construction with easy-open and close lid
• Environment-friendly, CFC-free, polyurethane liner
• Cold/heat transfer to foods via temperature-efficient liner
• Built-in heat dissipation fan with long-life, brushless motor
• HOT/OFF/COLD sliding power switch
• Automatic shut-off to prevent overheating of unit
• "COLD" and "HOT" LED indicators
CAUTIONS
• This unit is intended for use with a 12 volt DC power source that can
provide at least 4 amperes of current. DO NOT attempt to use with any
other power source.
• NEVER operate unit in an enclosed space. ALWAYS ensure that there is
adequate ventilation and free flow of air around the unit, so that air
expelled by the fan is effectively dissipated.
• When operating the unit in a vehicle or boat cabin, adequate ventilation
must be provided by an air conditioning system or open window. In a car
with windows up, air temperatures can reach 150 degrees F.
• This unit is intended for portable use only; it is not designed to be built-
in or recessed – this would interfere with the unit's air dissipation system,
and could cause a fire or other safety hazard.
• Use only with the supplied power cord. If cord becomes worn or
damaged, discontinue use and call Customer Service department at
(800) 618-5168 for authorized replacement.
• Never allow the cooler/warmer to be immersed in water or other liquid.
This will void the warranty.
3