Hollywood Elevator Rack F10 Installation Instructions

Hollywood elevator rack installation instructions

Hollywood Racks

F10 Elevator Rack Instructions

When using your Elevator Rack, always remember the following points:

 Install this rack on structurally sound boot lids and/or bumpers only.

 Never install upper hooks to plastic, glass or fiberglass.

 Clean surface of the boot lid and bumper prior to installation.

 Tighten all straps both before and after placing bikes on the rack.

 Never place more than 45kg / 100 lbs. on the Elevator Racks.

 Use at least 2 tie-down straps or shock (bungee) cords for each bike when securing bikes

to rack.

 Keep bicycle tires at least 30cm away from the exhaust pipe of the vehicle.

 Check the rack, bikes and strap tension regularly during use.

 Drive slowly when on bumpy or dirt roads.

safety strap

Table of Contents

Need help?

Do you have a question about the Elevator Rack F10 and is the answer not in the manual?

Page 1 Hollywood Racks F10 Elevator Rack Instructions When using your Elevator Rack, always remember the following points:  Install this rack on structurally sound boot lids and/or bumpers only.  Never install upper hooks to plastic, glass or fiberglass.  Clean surface of the boot lid and bumper prior to installation.
Page 2 1. Installing the Hollywood Elevator Rack on your vehicle: After removing the Elevator Rack from the box, rotate the lower U frame such that it aligns with the main frame approximately as indicated in Fig. 1. Use the lower adjustment hubs &...
Page 3 (at its option) a defective part or the complete rack without charge for labor or parts. Hollywood Racks may elect (at its option) to issue a refund equal to the purchase price paid for the product. This warranty does not cover problems caused by normal wear and tear including (but not limited to) weather, scratches, dents, rust, accidents, unlawful vehicle operation, misuse, abuse, neglect, theft, unauthorized modifications, or unauthorized repair.