Table of Contents
Advertisement
4
Software Installation
After finishing the hardware installation as described in this manual and
starting up your PC, you should be able to immediately take advantage
of the wireless function of the wireless keyboard and mouse. If the
keyboard and mouse are not working properly, see Chapter 6
Troubleshooting for tips on how to solve your problem.
4.1 Keyboard Driver Installation
If your operating system is Windows 2000, Windows ME or Windows
XP, you can immediately take advantage of the extra function
buttons on the keyboard (except 'Battery Low' and 'LED Light'
functions). But, if your operating system is Windows 95, Windows 98
or Windows NT 4.0, you will have to install the keyboard driver
software to take advantage of these functions. The keyboard
driver program is located on the driver CD included in the box.
1.
Insert the driver CD into your computers CD-ROM drive.
2.
Run the setup.exe in the keyboard-driver directory of the
driver CD.
3.
Follow the onscreen instructions to finish the installation
procedure.
4.
For detailed information on how to install the driver, please
refer to the readme.htm file.
4.2 Mouse Driver Installation
In order to take advantage of the special shortcut button
functionality of the mouse you will have to install the mouse driver
which is located on the driver CD included in the box.
1.
Make sure the driver CD is in your computers CD-ROM drive.
2.
Run the setup.exe in the mouse-driver directory of the driver
disk.
3.
Follow the on screen instructions to finish the installation
procedure.
7
Advertisement
Table of Contents
