Table of Contents
Advertisement
4
Software Installation
After finishing the hardware installation as described in this manual and starting
up your PC, you should be able to immediately take advantage of the wireless
function of the wireless keyboard and mouse. If the keyboard and mouse are
not working properly, see Chapter 6 Troubleshooting for tips on how to solve
your problem.
4.1 Keyboard Driver Installation
Keyboard Driver Installation
Keyboard Driver Installation
Keyboard Driver Installation
If your operating system is Windows 2000, Windows ME or Windows XP,
you can immediately take advantage of the extra function buttons on the
keyboard (except 'Battery Low' and 'LED Light' functions). But, if your
operating system is Windows 95, Windows 98 or Windows NT 4.0, you
will have to install the keyboard driver software to take advantage of
these functions. The keyboard driver program is located on the driver CD
included in the box.
1.
Insert the driver CD into your computers CD-ROM drive.
2.
Run the setup.exe in the keyboard-driver directory of the driver CD.
3.
Follow the onscreen instructions to finish the installation procedure.
4.
For detailed information on how to install the driver, please refer to
the readme.htm file.
4.2 Mouse Driver Installation
In order to take advantage of the special shortcut button functionality of
the mouse you will have to install the mouse driver which is located on the
driver CD included in the box.
1.
Make sure the driver CD is in your computers CD-ROM drive.
2.
Run the setup.exe in the mouse-driver directory of the driver disk.
3.
Follow the on screen instructions to finish the installation procedure.
7
Advertisement
Table of Contents
