Oki OKIPAGE 14i Service Manual page 116

Service Manual for OKIPAGE 14i Page: 42
Chapter 3 Disassembly
3.3.16 Sensor Plate (Inlet)
(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.3).
(3) Remove the face up stacker assy (see 3.3.7)
(4) Remove the lower base unit (see 3.3.4).
(5) Press the clamps of three sensor plates (inlet and paper) (1), and remove them by pressing them upward from the bottom.