REPLACE PCB BOARD
MAIN PC BOARD
NOTICE: to make sure the output protect point of laser diode is short before you dismantle main PC
board (3). After you replace main PC board, insert flexible cables and open protect point.
1. Draw out four flexible cables (1).
2. Unscrew two screws (2).
3. Dismantle Main PC board (3).
POWER SUPPLY PC BOARD
1. Draw out flexible cables£ ¨ 1£ ©
2. Unscrew six screws£ ¨ 2£ ©
3. Dismantle power supply PC board£ ¨ 3£ ©
2-4
SCREWS (2 )
M AIN P C BO ARD (3 )
2-4
FL EXIBL E CABL ES ( 1 )
FL EXIBL E CABL ES ( 1 )
SCREWS (2 )