Chevrolet 2013 Full-Size Truck Owner's Manual page 37

3. Press the AUX button a third
time to change the first row
video screen source to the
auxiliary device and the second
row video screen to the DVD
player.
4. Press the AUX button a fourth
time to change the source of
both video screens to the DVD
player.
How to Change the RSE Video
Screen Settings
The screen display mode,
brightness, and language can be
changed from the setup menu using
the remote control. To change a
setting:
1. Press .
2. Use , , , and
select the settings.
3. Press again to exit the
setup menu.
Audio Output
Audio from the DVD player or
auxiliary inputs can be heard
through the following:
Wireless Headphones
Vehicle Speakers
The RSE system transmits the
audio signal to the wireless
headphones if an audio signal is
available. See Headphones earlier
in this section for more information.
The front seat passengers are able
to listen to playback from the A/V
jacks through the vehicle speakers
by selecting Rear A/V as the source
on the radio.
Video Screens
The video screens are located in the
to
center roof of the first and second
rows of the vehicle.
Avoid directly touching
the video screen, as damage may
occur. See Cleaning the Video
Screens later in this section for
more information.
Infotainment System
Remote Control
To use the remote control, aim it at
the transmitter window at either
seatback console and press the
button. Direct sunlight or very bright
light could affect the ability of the
RSE transmitter to receive signals
from the remote control. Check the
batteries if the remote control does
not seem to be working. See
Battery Replacement later in this
section. Objects blocking the line of
sight could also affect the function
of the remote control.
37