Chevrolet 2013 Full-Size Truck Owner's Manual page 24

24 Infotainment System
6. Select the song name to record.
A progress bar displays.
Duplicate Content
When the record function is started,
there is a check to verify that it does
not already exist on the hard drive.
If the entire content of the CD exists
on the hard drive, it will not record
the content.
If it is determined that some or none
of the content exists, then only that
content will be copied to the hard
drive.
If the same file is recorded from
USB and CD, it is possible to have
duplicate tracks.
CD Eject
If the CD ejects before the recording
process completes, only tracks that
have been completely recorded are
stored to the hard drive, incomplete
tracks are discarded.
Power Mode
If the system is turned off during a
CD or USB recording process, it
stops. When the radio is turned
back on, the recording process does
not resume automatically.
Playing Hard Disc Drive
Content
To operate hard drive functions
while the HDD source is active, use
the following buttons or
touch-sensitive buttons:
(Play/Pause): Press to start,
pause or resume play of the current
media source.
(Seek Next/Forward):
1. Press to seek to the next track.
2. Press and hold to advance
quickly through playback.
3. Release this button to return to
playing speed. Elapsed time
displays.
(Seek Previous/Reverse):
1. Press to seek to the beginning of
the current or previous track.
If the track has been playing for
less than five seconds, the
previous track plays. If longer
than five seconds, the current
track restarts.
2. Press and hold this button to
reverse quickly through
playback. Release this button to
return to playing speed. Elapsed
time appears on the display.
Multifunction Knob: Turn to the
right or left to go to the next or
previous track.