Chevrolet 2013 Full-Size Truck Owner's Manual page 35

3. Press Rear Display 1 for the
second row video screen and
Rear Display 2 for the third row
video screen (if equipped).
4. Select the video source to be
used (AUX A/V or DVD).
If the front seat source is USB or
HDD, the rear seat audio (RSA) is
not available for USB or HDD.
Headphones
1. Battery cover
2. Channel 1 or 2 switch
3. Power button
4. Volume control
5. Power indicator light
RSE includes two 2-channel
wireless headphones. Channel 1 is
dedicated to the DVD player, and
Channel 2 is dedicated to any
external auxiliary device connected
to the A/V jacks. The headphones
are used to listen to various multi
Infotainment System
media. The wireless headphones
have a power button, channel 1/2
switch, and a volume control. Turn
the headphones off when not in use.
Push the power button to turn on
the headphones. A light on the
headphones comes on. If the light
does not come on, check the
batteries. Intermittent sound or static
can also indicate weak batteries.
See Battery Replacement later in
this section for more information.
Infrared transmitters are located
near the video screen. The
headphones shut off automatically
to save the battery power if the RSE
system is shut off or if the
headphones are out of range of the
transmitters for more than
three minutes. Moving too far
forward or stepping out of the
vehicle, can cause the headphones
to lose the signal or have static.
To adjust the volume on the
headphones, use the volume
control.
35