Honda TRX500FA 2006 Owner's Manual page 165

Gear Case Oil
1. Park the ATV on level ground.
2. Place an oil drain pan under the oil drain plug ( ).
3. Remove the oil filler cap ( ), drain plug and sealing washer ( ).
4. After the oil has completely drained, reinstall the drain plug with a
new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Fill the gear case with the recommended oil.
2.5 US oz (75 cm )
6. Remove the oil level check bolt ( ) and sealing washer. Make sure
the oil level reaches the oil level check hole ( ).
7. Install the oil filler cap and oil level check bolt with a new sealing
washer.
REAR
(5)
(4)
(1) oil drain plug
(2) oil filler cap
(3) sealing washer
Servicing Your Honda
156
2
(3)
1
4
5
(4) oil level check bolt
(5) oil level check hole
3
(2)
(1)
(3)