Updating Ibm Director - IBM Power PS700 Installation And User Manual

Power systems

Hide thumbs Also See for Power PS700:

Table of Contents

For more information about planning, deploying, and managing the use of host Ethernet adapters, see the

Configuring section of the PowerVM Information Roadmap.

Updating IBM Director

If you plan to use IBM Director to manage the blade server, you must check for the latest applicable IBM

Director updates and interim fixes.

To install the IBM Director updates and any other applicable updates and interim fixes, complete the

following steps.

Note: Changes are made periodically to the IBM Web site. The actual procedure might vary slightly from

what is described in this procedure.

1. Check for the latest version of IBM Director:

a. Go to the IBM Director download site at http://www.ibm.com/systems/management/director/

downloads.html.

b. If the drop-down list shows a newer version of IBM Director than the version that comes with the

blade server, follow the instructions on the Web page to download the latest version.

2. Install IBM Director.

3. Download and install any applicable updates or interim fixes for the blade server:

a. Go to the IBM Support site at http://www.ibm.com/systems/support/.

b. Under Product support, click BladeCenter.

c. Under Popular links, click Software and device drivers.

d. Click BladeCenter PS700 to display the list of downloadable files for the blade server.

Chapter 4. Configuring the blade server

Table of Contents