Freecom DATA TANK GATEWAY WLAN User Manual page 91

Note: You can also use the Freecom Network Storage Assistant for quick
installation of your printer in Windows. For detailed instructions on us-
ingthe FNSA, please refer to chapter 4, 'The Freecom Network Storage
Assistant' .
Mac OS X: Installing a USB printer
To install a USB printer, connect the printer to one of the USB host ports on the Data Tank
Gateway. Check to make sure the Data Tank Gateway is on. Then turn the printer on.
1. Connect a USB printer to the Data Tank Gateway.
2. Open the Data Tank Gateway Configuration page and check whether the printer was
detected under 'Information' -> 'USB' .
3. Open 'System preferences' -> 'Printing & Faxing' .
4. Click '+' to add a new printer.
5. The 'Printer Browser' opens. Select 'IP printer' as the printer type and select the fol-
lowing settings:
Protocol:
Address:
Queue name:
A list of available printer drivers is now compiled.
Data Tank Gateway in everyday use
HP Jet Direct-Socket
192.168.1.1:9100 (replace 192.168.1.1 with the IP address
that you set for your Data Tank Gateway)
You may leave this field blank.
GB
5
1