DeLonghi PRO 500 User Manual
DeLonghi PRO 500 User Manual

DeLonghi PRO 500 User Manual

Advertisement

Quick Links

GB

IMPORTANT

Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety.
Save these instructions for future reference.
WARNINGS
Read the following instructions carefully.
Before using the appliance, check that the mains supply
voltage corresponds to the voltage indicated on the
rating plate.
Only connect the appliance to a power supply and
sockets with a minimum current rating of 10 A and pro-
vided with an earth connection.
If the socket and power cable plug are incompatible, the
socket should be changed by qualified personnel only.
The safety of this appliance is guaranteed only if correc-
tly connected to a proper and effective earth connection
as specified by current electrical safety standards and
regulations. The manufacturer cannot be considered
responsible for damage caused by the absence of an
earth connection on the power supply line. If in doubt,
consult an expert.
Do not leave the iron unattended when plugged in.
Never leave the appliance filled with water in a room
where it will be subject to a temperature below or equal
to 0°C.
After removing the packing, make sure the appliance is
not damaged. If in doubt, do not use the appliance and
contact professional personnel.
Do not leave packaging (plastic bags, polystyrene foam,
etc) within reach of children as they could be dangerous.
Adapters, multiple sockets and/or extensions should not
be used. If their use is necessary, only adapters, multiple
sockets and extensions complying with current safety
standards and regulations should be used, taking care
not to exceed the power limit indicated on the adapter.
This appliance is intended for household use only. Any
other use is considered improper and thus dangerous.
Noises could occur when the steam generator is heating
up or cooling down. This is due to normal expansion of
the stainless steel it is made from.
The manufacturer is not liable for damage caused by
inappropriate, incorrect or irresponsible use or for
damage resulting from repairs carried out by unqualified
personnel.
If the cap or hydraulic and electric safety system are
damaged, have the components replaced with original
spare parts by qualified personnel.
To repair or if the power cable is damaged and requires
replacement, contact an authorised Customer Service
Centre in order to avoid compromising the efficiency of
your appliance and guarantee the validity of the guaran-
tee. For the same reasons, you are always recommended
to use original spare parts.
Do not open the cap while using the appliance or before
all the water has been exhausted. This occurs when
steam is no longer discharged by the iron. To add water,
unplug and wait about 15 minutes to avoid sudden tem-
perature changes. Place a cloth over the cap and
unscrew slowly to allow residual steam to escape slowly.
Use the iron rest provided ONLY. If it is damaged, use
only an original replacement.
The use of all electrical appliances implies the observance of
some fundamental rules.
I
4
IN PARTICULAR:
Never touch the appliance with wet or damp hands or
feet. Never immerse the appliance in water.
Never use the appliance in bathrooms.
Never pull the power cable or the appliance with wet or
damp hands or feet.
Never let children or unfit persons use the appliance
without supervision.
Never leave the appliance plugged in as it could be a
safety hazard.
Before cleaning or servicing, disconnect the appliance
by removing the plug from the socket.
In the event of malfunction or faulty operation, switch off
and do not attempt to repair. For all repairs contact a
Customer Service Centre appointed by the manufacturer
only and ask for original spare parts. Failure to respect
the above could reduce the safety of the appliance.
When the appliance is to be discarded, after unplugging
from the mains, the cable should be cut to make the
appliance unusable.
The power cable of this appliance should not be chan-
ged by the user. If it is damaged or needs replacing,
contact a Customer Service Centre appointed by the
manufacturer.
Never fill the appliance under running water.
All contact between the hot base and cables must be
rigorously avoided.
If the safety thermistor is activated, the appliance swit-
ches off automatically. Before re-use, it must be serviced
by qualified personnel.
Do not direct the steam jet toward people as this could
be dangerous.
Do not use the iron on excessively damp clothes.
After ironing, allow the iron to cool before putting away.
Never use mixtures of stain removers or similar.
Unplug the appliance when not in use. Do not leave
plugged in unnecessarily.
During use, the steam generator should not be moved. -
Never unscrew the steam generator cap while the
appliance is plugged into the mains.
The steam generator should be placed on a flat surface
extremely resistant to high temperatures. This appliance
complies with directive 89/336/EEC on radio interferen-
ce suppression.
The steam generator should be placed on a flat surface extre-
mely resistant to high temperatures. This appliance complies
with directive 89/336/EEC on radio interference suppres-
sion.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO 500 and is the answer not in the manual?

Questions and answers

Summary of Contents for DeLonghi PRO 500

  • Page 1 IMPORTANT Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety. Save these instructions for future reference. WARNINGS IN PARTICULAR: Read the following instructions carefully. • Never touch the appliance with wet or damp hands or feet.
  • Page 2 DESCRIPTION (10) Iron (9) "Iron on" ON/OFF switch indicator light Steam (18) regulation knob (11) Steam generator ON/OFF (17) "Check control" switch indicator light (12) "Steam (16) "Start" button generator on" indicator light (13) ) "Steam (15) "No water" ready" indicator (14) Water level indicator light...
  • Page 3 DESCRIPTION Control panel 1) Steam button lock (certain models only) 9) "Iron on" indicator light 2) Steam discharge button 10) Iron ON/OFF switch 2A)Steam discharge button (certain models only) 11) Steam generator ON/OFF switch 3) Iron thermostat knob 12) "Steam generator on" indicator light 4) “Iron at temperature”...
  • Page 4 INSTRUCTIONS STEAM IRONING Before steam ironing, make sure the fabric is suitable for this kind of iro- ning. The machine works with normal tap water. In case of very hard water (hardness above 27°F) we suggest using 50% distilled water diluted with tap water.
  • Page 5 • Wait for the "steam ready" (13) (fig. 6) and "iron at temperature" (4) (fig. 7a or 7b according to model) indicator lights go out. The appliance is now ready for ironing. When using the iron for the first time, you are recommended to pass it several times over a piece of cloth.
  • Page 6 • Turn the iron off using the switch (10) (fig. 10). • Unplug from the mains socket. Wait a few minutes for the iron to cool down. • Unscrew the cap slowly and fill as described in the paragraph "filling the steam generator".

Table of Contents