Epson PLQ-20 Setup Manual page 15

Use only the power cord that comes with this product. Use of
another cord may result in fire or electric shock.
This product's power cord is for use with this product only.
Use with other equipment may result in fire or electric shock.
When connecting this product to a computer or other device
with a cable, ensure the correct orientation of the connectors.
Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices
connected by the cable.
Place the printer where you can easily connect it to a network
interface cable, if necessary.
Leave adequate room around the printer for easy operation
and maintenance.
Avoid places subject to shocks and vibrations.
Place the printer near a wall outlet where you can easily
unplug the power code.
Keep the entire computer system away from potential sources
of electromagnetic interference, such as loudspeakers or the
base units of cordless telephones.
Avoid electrical outlet controlled by wall switches or
automatic timers. An interruption in power can erase
information in the memory of your printer or computer. Also
avoid outlets on the same circuit as large motors or other
appliances that can cause voltage fluctuations.
Use a grounded power outlet; do not use an adapter plug.
If you plan to use a printer stand, follow these guidelines:
Use a stand that can support at least 15 kg (33.1 lb) for PLQ-20
or 17 kg (37.5 lb) for PLQ-20M.
Safety Instructions
2
2
2
2
2
2
2
2
2
2
2
2
15