Adjustments
The flow water temperature that has been adjusted only applies to the central
heating and is independent of the hot water facility for the cylinder.
13
The boiler has a large number of settings options.
We advise you to contact your installer for adjus-
ting the boiler to the required settings.
Adjusting the flow water temperature (CH)
-
Press the Mode key briefly
(from the Technical reading).
The display will show PARA .
-
Press the Step key once.
The display will show 1 85 .
-
Press the + or the - key to alter the adjustments,
if necessary.
-
Press the Store key to confirm the setting.
The display will flash once.
-
Press the Mode key briefly.
The display will show StbY for a short while
and will return to the Technical reading.