Servicing Pcbs; Chassis Removal; Pcb Locations - Mitsubishi WS-48515 Service Manual

MODELS: WS-48515 / WS-55515 / WS-55615 / WS-55815 / WS-65515 / WS-65615 / WS-65815 / WS-73615
Chassis
Lock
(b)

Chassis Removal

1. Undo the cable wire ties to the Front Panel, Speakers, CRTs, etc.
2. Unplug the Card Reader USB and 1394 cables from the DM PCB.
2. Remove screw (a) securing the Main Chassis and screws (b) in models WS-55815 and WS-65815 .
3. Release the Chassis Locks on each side of the chassis.
4. Slide the Chassis out the rear of the unit.
5. Tilt upward to access the bottom of the main chassis.

PCB Locations

DM3-PCB
FIF-PCB
HDMI-PCB
TERMINAL-PCB
Main Chassis Removal
(a)
TUNER-PCB
E2P-PCB
MAIN-PCB
Page 25
Chassis
Lock
SIGNAL-PCB
DBF-PCB