Cabinet Separation Procedures; Ws-65517 / Ws-73517 Cabinet Separation; Servicing Pcbs; Chassis Removal - Mitsubishi WS-55517 Service Manual

MODELS: WS-55517 / WS-65517 / WS-73517
WS-65517 / WS-73517
Cabinet Separation Procedure
1. Pull the Speaker Grill from the cabinet.
2. Unplug the CC, ZF and GR connectors.
3. Remove 4 plastic covers and screws (a)
from each side of the cabinet.
4. Carefully lift the cabinet top and place it on
the floor.
5. Place the cabinet bottom in the desired
location.
6. Reverse the procedure and mount the
cabinet top on the cabinet bottom.

Chassis Removal

1. Undo the cable wire ties to the Front Panel, Speakers, CRTs, etc.
2. Unplug the 1394 cables from the DM module.
2. Remove screw (a) securing the Main Chassis.
3. Release the Chassis Locks on each side of the chassis.
4. Slide the Chassis out the rear of the unit.
5. Tilt upward to access the bottom of the main chassis.
CABINET SEPARATION PROCEDURE
Main Chassis Removal
Page 12