Sharp AR-M208 Service Manual page 23

44
44-34
Purpose Adjustment
Function Used to adjust the transfer current value.
(Purpose)
Operation/procedure
To support an individual necessity in paper and the environment, it is
variable in the range of 5 to 30uA in the increment of 1uA in each
mode.
When changing +V2, check with +V1 unchanged. If there is any trouble
in the half tone image of graphics, keep the relationship between +V1
and +V2 at the default and change it.
When the image quality is deteriorated because the user selects the
OHP mode and use other than the recommended OHP, decrease the
transfer current to adjust deterioration of black background picture
quality. If some of characters are not printed, increase the transfer cur-
rent.
(Initial screen) (Input/Executing screen)
Sim44-34 TC ADJ. Sim44-34 TC ADJ.
1:+V1 (600) 18 4:+V2 S-F(600)
2:+V2 F (600) 18
3:+V2 R (600) 16
1/4
Display items
600dpi +V1
1:+V1 (600)
600dpi +V2 front surface
2:+V2 F (600)
600dpi +V2 back surface
3:+V2 R (600)
600dpi +V2 small size front
4:+V2 S-F(600)
600dpi +V2 small size back
5:+V2 S-R(600)
600dpi +V2OHP
6:+V2 OHP(600)
1200dpi +V1
7:+V1 (1200)
1200dpi +V2 front surface
8:+V2 F (1200)
1200dpi +V2 back surface
9:+V2 R (1200)
10:+V2 S-F(1200) 1200dpi +V2 small size front
11:+V2 S-R(1200) 1200dpi +V2 small size
back
12:+V2 OHP(1200) 1200dpi +V2OHP
46
46-2
Purpose Adjustment
Function Used to adjust the copy exposure level.
(Purpose)
Item Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen) (Input screen)
Sim46-2 EXP. LEVEL
1:AE 50
2:TEXT 50
3:TEXT/PHOTO 50
1/3 50
24
[ 5- 30] 24
Setting
Content Default
range
5-30
5-30
5-30
5-30
5-30
5-30
5-30 Disabled
5-30 Disabled
5-30 Disabled
5-30 Disabled
5-30 Disabled
5-30 Disabled
Density
(Executing screen)
AR-M208 SIMULATION 8 - 9
(Auto adjustment)
Display items
1:AE
2:TEXT
3:TEXT/PHOTO
4:PHOTO
5:SUPER PHOTO *
6:AE(TS)
7:TEXT(TS)
8:TEXT/PHOTO(TS)
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
* SUPER PHOTO (5:) cannot be executed.
When [OK] or [START] key is pressed, a caution buzzer sounds.
(Only the adjustment value can be entered.)
46-18
Purpose Adjustment
Function Used to adjust the copy contrast. (Inclination)
(Purpose)
Item Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen)
18
Sim46-18 GAMMA SET.
18
1:AE
16
2:TEXT
24
3:TEXT/PHOTO
1/3
18
20
(Auto adjustment)
Display items
1:AE
2:TEXT
3:TEXT/PHOTO
4:PHOTO
5:SUPER PHOTO *
6:AE(TS)
7:TEXT(TS)
8:TEXT/PHOTO(TS)
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
* SUPER PHOTO (5:) cannot be executed.
When [OK] or [START] key is pressed, a caution buzzer sounds.
(Only the adjustment value can be entered.)
46-19
Purpose Adjustment
Function Used to change the image quality in the exposure
(Purpose) mode.
Item Picture quality
Operation/procedure
Select the mode with the 10-key and press the [OK] key.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Pressing the [BACK] key returns to the mode selection.
Auto exposure mode
• When SIM 26-6 (Destination setup) is changed from EX to Japan,
the setup value becomes 1 (Default: Japan). If, on the contrary, it is
changed from Japan to EX, the set value becomes 2 (Default: EX)
Content
AE
Character Level 3.0
Character/Photo Level 3.0
Photo Level 3.0
Super photo Level 3.0
AE (TS)
Character (TS) Level 3.0
Character/Photo (TS) Level 3.0
(Input screen) (Executing screen)
50
50
50
50
Content
AE
Character Level 3.0
Character/Photo Level 3.0
Photo Level 3.0
Super photo Level 3.0
AE(TS)
Character (TS) Level 3.0
Character/Photo (TS) Level 3.0
Setting
Default
range
1-99 50
Disabled
50
Setting
Default
range
1-99 50
Disabled
50