Changing Channels; Adjusting The Volume - Acer AT2055 User Manual

Step . Select the setup language you prefer.
Step 2. Please select country.
Step 3. Enter the correct time zone using the remote control.
Step 4. Ensure that your co-axial cables are connected correctly before proceeding.
Step 5. Scan for digital channels and analog channels.
Step 6. Setup is now complete. You are ready to begin watching TV.
If you leave the setup process before it is complete, you will be given a choice of
options:
. Resume setup
2. Resume setup wizard at next startup
3. Exit and do not remind me
Select an option and press OK to exit.

Changing channels

3
a. Press 0 - 9 on the remote control to select a channel. The channel changes after 2
seconds. Press ENTER to select the channel immediately.
b. Pressing the channel ( CH ) up / down button on the remote control will also change
the channel.

Adjusting the volume

4
Adjust the volume level using the ( VOL ) up/down button on the remote control.
Setup may vary due to local broadcast differences.