Changing Channels; Adjusting The Volume - Acer AT3705-MGW User Manual

Setup Wizard
2
Step 6. Setup is now complete. You are ready to begin watching TV.
If you leave the setup process before it is complete, you will be given a choice of options:
1. Resume setup
2. Resume setup at next startup
3. Exit and don't remind me
Select an option and press OK to exit.

Changing channels

1 2 3
4 5 6
7 8 9
0
RECALL ENTER
3
CH/PG

Adjusting the volume

VOL
4
Setup may vary due to local broadcast differences.
Step 5. Scan for analog channels.
ENTER
1 Press 0-9 on the remote control to select a channel. The
channel changes after 2 seconds. Press ENTER to select the
channel immediately.
2 Pressing the channel (CH) up/down button on the remote
control will also change the channel.
Adjust the volume level using the VOL +/- button on the
remote control.
13