Honeywell StratosH MS2321 Installation And User Manual page 45

T
ROUBLESHOOTING
Symptom
Aux Port Operation With Any Interface
The secondary scanner is
not functioning.
The secondary scanner
powers up but data is not
relayed to the host.
* Refer to the MS2xxx Stratos Series Configuration Addendum (
Port, Quick Start for a Secondary Honeywell Scanner.
Possible Cause(s)
The secondary scanner cable
may not be connected to the
proper port on the StratosH.
The auxiliary com port may not
be operating properly.
Refer to the user's guide provided with the secondary scanner.
Ensure that the secondary scanner is connected to the StratosH's
com port marked "Aux" port.
* The StratosH must be configured to enable the auxiliary port.
The auxiliary input port's data format must match the main output
format of the secondary scanner.
00-02034x) under Scanner Configuration Bar Codes: Auxiliary
PN
Solution
41