With A Tether - Honda Accord Coupe 2007 Owner's Manual

Installing a Child Seat with a
Tether
COVER
TETHER ANCHORAGE POINTS
A child seat with a tether can be
installed in any seating position in
the back seat, using the anchorage
points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Using an Outer Anchor
ANCHOR
TETHER
STRAP
HOOK
1. After properly securing the child
seat (see page 43 ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
2. Lift the cover, then attach the
tether strap hook to the anchor,
making sure the strap is not
twisted.
3. Tighten the strap according to the
seat maker's instructions.
Installing a Child Seat
Using the Center Anchor
TETHER STRAP HOOK
ANCHOR
1. After properly securing the child
seat (see page 43 ), route the
tether strap over the seat-back.
2. Follow steps 2 and 3 from the
previous column.
45