C Onfiguring The Ip A Ddress Of The Pc - Hawking HNC5W Smart Cam Pro Manual

3.3 Configuring the IP Address of the PC
If you fail to access to the camera using the above methods,
please check the IP address of your computer. You can connect to
the camera directly from your computer to configure the camera.
You need to set up the IP addresses to be in the same segment for
the two devices to communicate.
1. On your computer, click Start > Control Panel to open the
Control Panel window.
2. Double-click Network Connection to open the Network
Connection window.
3. Right-click Local Area Connection and then click Properties
from the shortcut menu.
4. When the Local Area Connection Properties window appears,
select the General tab.
5. Select Internet Protocol [TCP/IP] and then click Properties to
bring up the Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment of
the camera, select the Use the following IP address option.
Then, enter an IP address into the empty field. The suggested
IP address is
suggested Subnet mask is 255.255.255.0.
7. When you are finished, click OK.
192.168.0.x (x is 1~254 except 30), and the
- 22 -