Using Ipfinder - Hawking HNC5W Smart Cam Pro Manual

C
HAPTER
A
CCESSING

3.1 Using IPFinder

The camera comes with a setup utility, IPFinder, which is included
in the Installation CD-ROM, allowing you to search for the camera
on your network easily.
1. Insert the Installation CD-ROM into your computer's CD-ROM
drive to initiate the Auto-Run program.
2. Click the IPFinder item to launch the utility. The control panel
will appear as below.
Click About to get the Version information of IPFinder.
Click Link to connect the selected camera.
Click Change IP to modify the IP address of the selected camera.
Click Search to find the IP address of the connected camera(s).
Click Exit to close the utility.
3. Once you get the IP address of the camera, launch the Web
browser or UltraView Pro to access your camera.
3
T C
HE
- 17 -
AMERA
Display the connected
camera(s). Double click
to link the Camera.