Headlamp Aiming; Bulb Replacement; Taillamps, Turn Signal And Stoplamps - Chevrolet Traverse Owner's Manual

Headlamp aim has been preset and
should need no further adjustment.
If the vehicle is damaged in a crash,
the headlamp aim may be affected.
If adjustment to the headlamps is
necessary, see your dealer.
For the proper type of replacement
bulbs, see
.
For any bulb changing procedure
not listed in this section, contact
your dealer.
1. Turn Signal Lamp
2. Stoplamp/Taillamp
To replace one of these bulbs:
1. Open the liftgate. See
.
2. Remove the convenience net,
if the vehicle has one.
3. Remove the two taillamp screw
covers.
4. Remove the two screws holding
the taillamp assembly in place.
5. Pull out the taillamp assembly.