Seat Adjustment; Manual Seats; Power Seats - Chevrolet Traverse Owner's Manual

1. Seat Adjustment Handle
2. Driver Seat Height Adjustment
Lever
3. Seatback Lever
To adjust a manual seat:
1. Lift the handle (1) under the seat
to unlock it.
2. Slide the seat to the desired
position, and then release the
handle (1).
3. Try to move the seat back and
forth to be sure it is locked in
place.
Move the lever (2) up or down to
raise or lower the seat.
Use the lever (3) to adjust the
seatback.
See Seat Adjustment on page 3-3
and Reclining Seatbacks on
page 3-5.
1. Seat Adjustment Control
2. Seatback Control
3. Lumbar Control
To adjust a power seat, if equipped:
Move the seat forward or
rearward by sliding the
control (1) forward or rearward.
Raise or lower the front part of
the seat cushion by moving the
front of the control (1) up
or down.
Raise or lower the entire seat by
moving the rear of the control (1)
up or down.
Adjust the seatback by tilting the
top of the control (2) forward or
rearward.
See Reclining Seatbacks on
page 3-5.
Increase or decrease lumbar
support by pressing the front or
rear of the control (3).
See Lumbar Adjustment on
page 3-4.
See Power Seat Adjustment on
page 3-4.