Agitator Cleaning; Brush Servicing - Panasonic MC-CL935 Operating Instructions Manual

Agitator Cleaning

Agitator Assembly
Assemblage de l'agitateur
Ensamble del agitador
End Cap
Bouchon
Tapa del extremo
Brush Unit
Agitateur
Unidad del cepillo

Brush Servicing

New Brushes
Nouvelles brosses
Cepillos Nuevos
Base Support Bars
Barres de support de la base
Barra de soporte de la base
Belt Path
Chemin de courroie
Ruta de la correa
End Cap
Bouchon
Tapa del extremo
Worn Brushes
Brosses usées
Cepillos desgastado
NOTE: In order to keep cleaning
efficiency high and to prevent damage
to your vacuum cleaner, the agitator
must be cleaned every time the belt is
changed.
➢ Check and remove hair, string and
lint build-up frequently in the Power
Nozzle agitator and end cap areas.
➢ Remove any dirt or debris in the
belt path area or in the brush roller
area.
➢ Carefully remove any string or
debris located on the agitator or
end caps.
➢ Remove POWER NOZZLE cover.
➢ Remove the light bulb by pulling
straight out.
➢ To replace the light bulb, carefully
insert fully into slot.
➢ Only use a bulb rated 13V AC- 9
Watts.
➢ Replace POWER NOZZLE cover.
TO CHECK BRUSHES:
➢ When brushes are worn to the
level of the base support bar,
replace the agitator.
➢ To replace agitator assembly see
BELT CHANGING, p. 40.
- 44 -