Philips RQ 1175 Manual page 33

ENGLISH
32
Problem
The shaver does
not work when I
press the on/off
button.
Possible cause
Jet Clean System has
not cleaned the shaver
properly, because the
cleaning chamber is
soiled or the cleaning
The rechargeable
battery is empty.
travel lock is activated.
The shaving head holder
is soiled or damaged to
such an extent that the
motor cannot run.
The temperature of the
shaver is too high. In this
case, the shaver does
not work.
Solution
Clean the shaver
thoroughly before you
continue shaving. If
the cleaning chamber
(see chapter 'Cleaning
and maintenance').
Recharge the battery
(see chapter 'Charging').
Press the on/off button
for 3 seconds to
deactivate the travel
lock.
Clean the shaving head
holder or replace it
(see chapters 'Cleaning
and maintenance' and
'Replacement').
Let the shaver cool
down. As soon as the
temperature of the
shaver has dropped
switch on the shaver
again.